← 研踪 PaperTrailarXiv:2603.04760 · v2
Designing and Validating a Self-Aligning Tool Changer for Modular Reconfigurable Manipulation Robots
首次提交 2026-03-05 11:17
版本更新 2026-11-16 18:05
雷达观测 2026-11-17 17:11
摘要
Modular reconfigurable robots require reliable mechanisms for automated tool exchange, but conventional rigid active couplings often fail due to inevitable positioning and orientational errors. To address this, we propose a misalignment-tolerant tool changer. The tool changer consists of an insert part on the robot side, which contains a servo-driven cam and lock-pin, and a receptacle part on the tool side, which has an isosceles triangular lead-in guide and chamfered walls. During insertion, these geometries generate angled contact forces that passively align the two parts, so the tool changer compensates for angular and lateral misalignments without force sensors. A motor-driven rotating tool exchange station stores the tools and rotates to bring the selected tool to the exchange position. Experiments confirmed that, with the current guide and chamfer geometry, the tool changer tolerates rotational offsets of 20 degrees and lateral offsets of up to 7 mm.
作者备注:7 pages, 13 figures
观测到的版本
相邻记录可能跳过中间版本;首次发现 v2 及以上也会标为版本更新。
v2 · 2026-11-16 18:05 · 最新观测版本
Designing and Validating a Self-Aligning Tool Changer for Modular Reconfigurable Manipulation Robots
Modular reconfigurable robots require reliable mechanisms for automated tool exchange, but conventional rigid active couplings often fail due to inevitable positioning and orientational errors. To address this, we propose a misalignment-tolerant tool changer. The tool changer consists of an insert part on the robot side, which contains a servo-driven cam and lock-pin, and a receptacle part on the tool side, which has an isosceles triangular lead-in guide and chamfered walls. During insertion, these geometries generate angled contact forces that passively align the two parts, so the tool changer compensates for angular and lateral misalignments without force sensors. A motor-driven rotating tool exchange station stores the tools and rotates to bring the selected tool to the exchange position. Experiments confirmed that, with the current guide and chamfer geometry, the tool changer tolerates rotational offsets of 20 degrees and lateral offsets of up to 7 mm.
查看此版本解读 →查看此版本原文 ↗