跳到正文
研踪PaperTrail
← 研踪 PaperTrail

arXiv:2611.09877 · v1

Locating Contact on Tendon-Driven Continuum Robots From Tendon Measurements Alone via Constrained Moving Horizon Estimation

仅凭肌腱测量通过约束移动视界估计定位肌腱驱动连续机器人上的接触

首次提交 2026-11-07 02:53
版本更新 2026-11-07 02:53
雷达观测 2026-11-09 13:22
arXiv ↗PDF ↗

摘要

Tendon-driven continuum robots can reach through constrained spaces, but contact along their bodies is invisible to the sensors at their motors. We show that this is a structural limitation rather than a tuning problem: the map from contact forces to tendon measurements has a null space of dimension at least seven, so no estimator that leaves the contact support free can locate contact. When the obstacle geometry is known, however, non-penetration and complementarity make the contact force locally identifiable, and we prove that the resulting system with unknown contact inputs is locally exponentially strongly detectable. We present a constrained moving horizon estimator (MHE) that encodes these conditions and runs in real time as one quadratic program per sample, and we give a local, mode-wise robust stability result for it. In a finite- element benchmark of a two-section robot pressing and sliding on a wall, the estimator located contact to 0.9 mm and estimated contact force to 0.22 N, compared with 65 mm and 0.72 N for a tuned extended Kalman filter (EKF) with state projection. The estimator tolerated millimeter- level errors in the obstacle position and unmodeled wall friction, under which the projected EKF failed. Under randomized model mismatch over 40 trials, including unmodeled tendon friction, it remained better in force and location in every trial. Without contact, the MHE offered no advantage over the EKF, which confirms that its benefit comes from the contact constraints. This report extends a letter submitted to IEEE Control Systems Letters with complete proofs and additional experiments.

AI 论文解读

基于摘要 · 非全文审阅

作者提出一种约束移动视界估计器(MHE),在已知障碍几何下仅用肌腱测量即可定位肌腱驱动连续机器人上的接触位置与接触力。

正在读取账号与研究记录…

版本差异

目前只收录了一个版本。收录下一版后,可以对照标题、作者、分类和摘要。

观测到的版本

相邻记录可能跳过中间版本;首次发现 v2 及以上也会标为版本更新。

v1 · 2026-11-07 02:53 · 最新观测版本

Locating Contact on Tendon-Driven Continuum Robots From Tendon Measurements Alone via Constrained Moving Horizon Estimation

Tendon-driven continuum robots can reach through constrained spaces, but contact along their bodies is invisible to the sensors at their motors. We show that this is a structural limitation rather than a tuning problem: the map from contact forces to tendon measurements has a null space of dimension at least seven, so no estimator that leaves the contact support free can locate contact. When the obstacle geometry is known, however, non-penetration and complementarity make the contact force locally identifiable, and we prove that the resulting system with unknown contact inputs is locally exponentially strongly detectable. We present a constrained moving horizon estimator (MHE) that encodes these conditions and runs in real time as one quadratic program per sample, and we give a local, mode-wise robust stability result for it. In a finite- element benchmark of a two-section robot pressing and sliding on a wall, the estimator located contact to 0.9 mm and estimated contact force to 0.22 N, compared with 65 mm and 0.72 N for a tuned extended Kalman filter (EKF) with state projection. The estimator tolerated millimeter- level errors in the obstacle position and unmodeled wall friction, under which the projected EKF failed. Under randomized model mismatch over 40 trials, including unmodeled tendon friction, it remained better in force and location in every trial. Without contact, the MHE offered no advantage over the EKF, which confirms that its benefit comes from the contact constraints. This report extends a letter submitted to IEEE Control Systems Letters with complete proofs and additional experiments.

查看此版本解读 →查看此版本原文 ↗