跳到正文
研踪PaperTrail
← 研踪 PaperTrail

arXiv:2611.18186 · v1

NPU-Accelerated GNSS Signal Acquisition

首次提交 2026-11-13 21:56
版本更新 2026-11-13 21:56
雷达观测 2026-11-16 11:41
arXiv ↗PDF ↗

摘要

On small single-board computers (SBCs), GNSS signal acquisition is a major CPU load. This paper proposes using the neural processing unit (NPU) of an SBC not for machine learning but as an accelerator for the parallel code search in GNSS signal acquisition. The discrete Fourier transform (DFT) used in acquisition is decomposed by the four-step DFT into matrix products of small DFTs and expressed by 1×11\times1 convolutions, element-wise products, and transposes, which NPUs execute efficiently. Furthermore, we propose a method that divides the DFT, the non-coherent integration, and the peak detection between the CPU and the NPU according to the configuration of the NPU (an NPU with its own memory connected via PCIe, or an NPU sharing memory with the CPU). The proposed method is implemented in the open-source software GNSS receiver Pocket SDR and evaluated on a Raspberry Pi 5 combined with the external AX8850 NPU and on the NPU built into the SoC (RK3588) of the ROCK 5C, a small SBC of comparable size. Compared with acquisition by an optimized CPU implementation, the acquisition of short codes on the Raspberry Pi 5 with the AX8850 is 3.0-3.8 times faster. In the evaluation of the whole receiver, the number of tracking channels that reach their first lock within 30 s with the NPU is 1.5 times that with the CPU, and the time until 90% of the channels are locked is reduced from 66 s to 26 s. Furthermore, because the CPU load of acquisition is reduced, the number of tracking channels that can be processed in real time increases from about 175 to about 230. These results show that using the NPU on SBCs with limited CPU resources is effective for achieving both GNSS signal acquisition and tracking. The implementation is publicly available as open source under the name PocketSDR-NPU.

AI 论文解读

基于摘要 · 非全文审阅

此版本尚未生成 AI 解读。解读由后台任务生成并按论文版本保存,登录后共享已有结果。

版本差异

目前只收录了一个版本。收录下一版后,可以对照标题、作者、分类和摘要。

观测到的版本

相邻记录可能跳过中间版本;首次发现 v2 及以上也会标为版本更新。

v1 · 2026-11-13 21:56 · 最新观测版本

NPU-Accelerated GNSS Signal Acquisition

On small single-board computers (SBCs), GNSS signal acquisition is a major CPU load. This paper proposes using the neural processing unit (NPU) of an SBC not for machine learning but as an accelerator for the parallel code search in GNSS signal acquisition. The discrete Fourier transform (DFT) used in acquisition is decomposed by the four-step DFT into matrix products of small DFTs and expressed by 1×11\times1 convolutions, element-wise products, and transposes, which NPUs execute efficiently. Furthermore, we propose a method that divides the DFT, the non-coherent integration, and the peak detection between the CPU and the NPU according to the configuration of the NPU (an NPU with its own memory connected via PCIe, or an NPU sharing memory with the CPU). The proposed method is implemented in the open-source software GNSS receiver Pocket SDR and evaluated on a Raspberry Pi 5 combined with the external AX8850 NPU and on the NPU built into the SoC (RK3588) of the ROCK 5C, a small SBC of comparable size. Compared with acquisition by an optimized CPU implementation, the acquisition of short codes on the Raspberry Pi 5 with the AX8850 is 3.0-3.8 times faster. In the evaluation of the whole receiver, the number of tracking channels that reach their first lock within 30 s with the NPU is 1.5 times that with the CPU, and the time until 90% of the channels are locked is reduced from 66 s to 26 s. Furthermore, because the CPU load of acquisition is reduced, the number of tracking channels that can be processed in real time increases from about 175 to about 230. These results show that using the NPU on SBCs with limited CPU resources is effective for achieving both GNSS signal acquisition and tracking. The implementation is publicly available as open source under the name PocketSDR-NPU.

查看此版本解读 →查看此版本原文 ↗