跳到正文
研踪PaperTrail
← 研踪 PaperTrail

arXiv:2611.21378 · v1

Data-Driven Predictive Control for Autonomous Vehicle Racing under Varying Friction

首次提交 2026-11-17 00:38
版本更新 2026-11-17 00:38
雷达观测 2026-11-17 16:10
arXiv ↗PDF ↗

摘要

Data-driven predictive control (DPC) predicts future outputs by combining recorded input-output trajectory data such that the combined trajectory approximately matches a measured initial trajectory and tracks a provided reference. This paper investigates to what extent and under which conditions DPC using data pooled across operating conditions retains the prediction accuracy of DPC using data from the current operating condition. In autonomous vehicle racing, the tire-road friction varies between racetrack sections and tire sets. If the initial trajectory and the recorded data originate from different frictions, prediction accuracy of DPC degrades. Ensuring the frictions match requires knowing the friction during recording and estimating the current friction explicitly. Instead, we pool data recorded at different frictions. We compare the prediction accuracy of DPC using data recorded under the current friction (matched), a different friction (mismatched) and data pooled from both frictions. We evaluate in simulation and small-scale vehicle experiments in the Cyber-Physical Mobility Lab (CPM Lab). Our results show that pooled data keep the multi-step root-mean-square prediction error within 1.5 times that of matched data, whereas mismatched data increase it by a factor of 2.2 to 3.4. To assess how this prediction accuracy carries over to control, we evaluate the tracking error from the raceline in closed loop. In simulation, DPC with pooled data tracks comparably to nonlinear model predictive control (13.7 cm versus 13.3 cm) and close to DPC with matched data in the CPM Lab, differing by 0.1 cm on the low-friction tires (1.6 cm versus 1.5 cm) and by 0.2 cm on the high-friction tires (0.9 cm versus 1.1 cm). DPC thus provides partial adaptation to varying friction, without a dedicated adaptation method.

作者备注:8 pages, 4 figures. Submitted to the 2027 European Control Conference (ECC). Code and data: https://github.com/bassamlab/multisurface-racing-with-dpc

AI 论文解读

基于摘要 · 非全文审阅

此版本尚未生成 AI 解读。解读由后台任务生成并按论文版本保存,登录后共享已有结果。

版本差异

目前只收录了一个版本。收录下一版后,可以对照标题、作者、分类和摘要。

观测到的版本

相邻记录可能跳过中间版本;首次发现 v2 及以上也会标为版本更新。

v1 · 2026-11-17 00:38 · 最新观测版本

Data-Driven Predictive Control for Autonomous Vehicle Racing under Varying Friction

Data-driven predictive control (DPC) predicts future outputs by combining recorded input-output trajectory data such that the combined trajectory approximately matches a measured initial trajectory and tracks a provided reference. This paper investigates to what extent and under which conditions DPC using data pooled across operating conditions retains the prediction accuracy of DPC using data from the current operating condition. In autonomous vehicle racing, the tire-road friction varies between racetrack sections and tire sets. If the initial trajectory and the recorded data originate from different frictions, prediction accuracy of DPC degrades. Ensuring the frictions match requires knowing the friction during recording and estimating the current friction explicitly. Instead, we pool data recorded at different frictions. We compare the prediction accuracy of DPC using data recorded under the current friction (matched), a different friction (mismatched) and data pooled from both frictions. We evaluate in simulation and small-scale vehicle experiments in the Cyber-Physical Mobility Lab (CPM Lab). Our results show that pooled data keep the multi-step root-mean-square prediction error within 1.5 times that of matched data, whereas mismatched data increase it by a factor of 2.2 to 3.4. To assess how this prediction accuracy carries over to control, we evaluate the tracking error from the raceline in closed loop. In simulation, DPC with pooled data tracks comparably to nonlinear model predictive control (13.7 cm versus 13.3 cm) and close to DPC with matched data in the CPM Lab, differing by 0.1 cm on the low-friction tires (1.6 cm versus 1.5 cm) and by 0.2 cm on the high-friction tires (0.9 cm versus 1.1 cm). DPC thus provides partial adaptation to varying friction, without a dedicated adaptation method.

查看此版本解读 →查看此版本原文 ↗