跳到正文
研踪PaperTrail
← 研踪 PaperTrail

arXiv:2611.23120 · v1

Pressure Drop: Gravity Vector Estimation from a Distributed Barometric Pressure Sensor Array

压降:基于分布式气压传感器阵列的重力向量估计

首次提交 2026-11-18 01:38
版本更新 2026-11-18 01:38
雷达观测 2026-11-18 12:34
arXiv ↗PDF ↗

摘要

While gravity is often used in mobile robotics as a global constraint for Simultaneous Localization and Mapping (SLAM) algorithms, most estimation methods rely on indirect observation of the gravity vector. In this paper, we propose the use of altimeter measurements to directly observe the direction of the gravity vector. We provide a theoretical evaluation of the estimation noise and validate it through extensive experimental data, along with an evaluation of the impact of intersensor distance on our gravity vector estimates. Experimental results demonstrate that a median error of 0.87∘0.87^\circ on the tilt estimation can be achieved with our system in semi-static scenarios. Furthermore, we demonstrate the potential of this approach by comparing it with state-of-the-art methods based on Inertial Measurement Units (IMUs). We highlight that we achieve similar performance to that of IMU-based systems in highly dynamic scenarios and even outperform in specific cases of accelerometer measurement saturation. Finally, an additional experiment shows the potential use within a robotic system through the integration into an Iterative Closest Point (ICP) algorithm.

作者备注:8 pages, 6 figures, submitted to IEEE ICRA 2027

AI 论文解读

基于摘要 · 非全文审阅

作者提出用分布式气压高度计测量直接观测重力向量方向,并在半静态场景下报告约0.87°的中位倾角误差。

正在读取账号与研究记录…

版本差异

目前只收录了一个版本。收录下一版后,可以对照标题、作者、分类和摘要。

观测到的版本

相邻记录可能跳过中间版本;首次发现 v2 及以上也会标为版本更新。

v1 · 2026-11-18 01:38 · 最新观测版本

Pressure Drop: Gravity Vector Estimation from a Distributed Barometric Pressure Sensor Array

While gravity is often used in mobile robotics as a global constraint for Simultaneous Localization and Mapping (SLAM) algorithms, most estimation methods rely on indirect observation of the gravity vector. In this paper, we propose the use of altimeter measurements to directly observe the direction of the gravity vector. We provide a theoretical evaluation of the estimation noise and validate it through extensive experimental data, along with an evaluation of the impact of intersensor distance on our gravity vector estimates. Experimental results demonstrate that a median error of 0.87∘0.87^\circ on the tilt estimation can be achieved with our system in semi-static scenarios. Furthermore, we demonstrate the potential of this approach by comparing it with state-of-the-art methods based on Inertial Measurement Units (IMUs). We highlight that we achieve similar performance to that of IMU-based systems in highly dynamic scenarios and even outperform in specific cases of accelerometer measurement saturation. Finally, an additional experiment shows the potential use within a robotic system through the integration into an Iterative Closest Point (ICP) algorithm.

查看此版本解读 →查看此版本原文 ↗