跳到正文
研踪PaperTrail
← 研踪 PaperTrail

arXiv:2611.24173 · v1

Dual-Actuation Emulation of Scaled Relative Orbital Dynamics on a Free-Flyer

首次提交 2026-11-18 18:15
版本更新 2026-11-18 18:15
雷达观测 2026-11-19 15:04
arXiv ↗PDF ↗

摘要

Ground-based free-flyer testbeds reproduce the planar motion of a free-floating spacecraft using air bearings, but not the relative dynamics of spacecraft in orbit. We present a dual-actuation architecture that physically emulates Clohessy-Wiltshire dynamics on an open-source free-flyer. Two model predictive controllers run in parallel: one drives the solenoid thrusters with an orbital dynamics model, representing the spacecraft under test; the other drives bidirectional propellers that physically apply the orbital accelerations, continuously updating its reference to account for thruster-induced velocity changes. A dynamic similitude maps the orbital scenario onto the limited floor area and actuation rates of the testbed, letting the spacecraft controller run directly at orbital scale. We validate the architecture on hardware and against a high-fidelity orbital simulation, where the orbital accelerations instead arise naturally, both driven by the identical spacecraft controller. Their agreement indicates that the testbed reproduces the relative orbital motion the controller would encounter in flight.

作者备注:7 pages, 4 figures. Presented at the 2026 IEEE International Conference on Space Robotics (iSpaRo); to appear in IEEE Xplore

AI 论文解读

基于摘要 · 非全文审阅

此版本尚未生成 AI 解读。解读由后台任务生成并按论文版本保存,登录后共享已有结果。

版本差异

目前只收录了一个版本。收录下一版后,可以对照标题、作者、分类和摘要。

观测到的版本

相邻记录可能跳过中间版本;首次发现 v2 及以上也会标为版本更新。

v1 · 2026-11-18 18:15 · 最新观测版本

Dual-Actuation Emulation of Scaled Relative Orbital Dynamics on a Free-Flyer

Ground-based free-flyer testbeds reproduce the planar motion of a free-floating spacecraft using air bearings, but not the relative dynamics of spacecraft in orbit. We present a dual-actuation architecture that physically emulates Clohessy-Wiltshire dynamics on an open-source free-flyer. Two model predictive controllers run in parallel: one drives the solenoid thrusters with an orbital dynamics model, representing the spacecraft under test; the other drives bidirectional propellers that physically apply the orbital accelerations, continuously updating its reference to account for thruster-induced velocity changes. A dynamic similitude maps the orbital scenario onto the limited floor area and actuation rates of the testbed, letting the spacecraft controller run directly at orbital scale. We validate the architecture on hardware and against a high-fidelity orbital simulation, where the orbital accelerations instead arise naturally, both driven by the identical spacecraft controller. Their agreement indicates that the testbed reproduces the relative orbital motion the controller would encounter in flight.

查看此版本解读 →查看此版本原文 ↗