Background and Objective: Our main goal is ultrasound guidance: moving a probe until its image matches a target view. Published methods for each part of a guide are evaluated in separate simulators. We asked whether these methods, combined into one guide, are good enough. Methods: We built USB Gym, a testbed whose standard engine simulates ultrasound from public patient CT, with a network drawing organ textures from CT labels. Its guide has three replaceable parts (slots), an organ segmenter, a controller and a reward, which received 20 published methods, each run on the same 60 episodes of six held-out patients. In each slot, a published method replaced ours only if detectably better on these patients. The better of this combination and our original guide on 20 new CTs is the benchmark baseline. A pose oracle, reading the exact probe pose available only in simulation, set the reference. The results below are exploratory. Results: On these CTs, the probe started on average 16.0 mm from the target view; the pose oracle brought it to 1.5 mm. Of the results known when the combination was fixed, only an image-similarity reward (SSIM) was slightly but detectably better, so the combination was our guide with that reward. This combination was the benchmark baseline, ending at 13.7 mm (16% of the oracle's progress). Conclusions: Combining untuned published methods with ours did not guide the probe near the target view; the task remains under-explored. The testbed accepts new methods; no guide was tested on hardware.
Yuxi Hu, Wenhao Dong, Jun Zhang, Friedrich Fraundorfer
Feed-forward 3D Gaussian Splatting (3D-GS) becomes increasingly difficult to scale to long multi-view sequences. Anchor-based compression methods such as ZPressor alleviate representation growth by decoding Gaussians only from a compact set of anchor feature maps, but keeping these anchors fixed forces each one to aggregate an increasing number of support views. We identify this representation--fusion mismatch and introduce \textbf{CrossPressor}, a training-free method for scalable anchor-based fusion. CrossPressor preserves all decoder-facing anchor queries while constraining the view-growing support sequence through coverage-cycled evidence routing, distributing retained spatial evidence across support views and fusion layers while keeping all support views represented. Routing before K/V projection, together with joint context packing, further reduces support-side fusion cost without retraining. CrossPressor maintains reconstruction quality close to dense fusion while achieving up to $26.12\times$ faster cross-view fusion and $1.43\times$ end-to-end acceleration on long input sequences. Our project page is at: https://yuhsihu.github.io/CrossPressor.
Dexterous manipulation involves not only moving objects, but also arranging the hand around them to maintain useful contacts and enable subsequent actions. Yet many learning-based systems specify goals primarily through object poses or trajectories, leaving hand-object configurations to emerge implicitly. We introduce DexHOT, which formulates dexterous manipulation as hand-object configuration transfer: moving between feasible configurations that jointly specify hand articulation and object pose relative to the wrist. DexHOT learns a reusable relation-conditioned transfer primitive from synthetic feasible configuration pairs, without human reference motions, and composes long-horizon behaviors through closed-loop tracking of configuration subgoals. On DexHOTBench with 120 objects, a single policy achieves 80.5% transfer success on seen objects and 69.4% on unseen objects; on a real dexterous hand, it achieves 61.5% success over 200 real-robot transfers and 90% task success across six demonstration-guided tasks. These results show that explicit hand-object goals provide an expressive and composable interface for dexterous manipulation. More details and videos are available at https://dex-hot.github.io/.
A robot world model that serves as a simulator must do more than generate plausible videos: it must faithfully follow commanded actions, maintain consistency across camera views, and sustain coherent long-horizon rollouts. We present PrimeSim, an action-conditioned, multiview world model simulator that addresses these challenges through progressive midtraining and posttraining. Starting from a pretrained video generator, we midtrain on 30,110 hours of robot demonstrations spanning 22 platforms. To improve action following, we introduce a unified cross-embodiment action representation and frame-aligned dual-path conditioning to strengthen action-frame correspondence. To maintain multiview consistency, we develop view-aware interleaved attention with explicit camera identities, enabling cross-view information exchange while preserving view-specific representations. We further introduce a fast-video, slow-memory posttraining framework that transforms the bidirectional video generator into an efficient autoregressive simulator. By combining fast causal generation, self-rollout training, and hierarchical temporal memory, PrimeSim mitigates error accumulation from self-generated histories and supports coherent long-horizon simulation. PrimeSim runs at 10.1 FPS, remains stable over long-horizon rollouts on rigid and deformable manipulation tasks, and transfers to held-out platforms within 100 to 200 gradient steps where the pretrained backbone does not. Against five open-source action-conditioned world models it leads four of the five WorldSimProbe suites and posts the best overall EWMBench score, while fine-grained local calibration still trails the field; its rollouts are faithful enough to support GRPO-based policy optimization. We release the model weights, inference code, and training code.
As streaming generation becomes the dominant serving paradigm for both text-only and multimodal large language models, ensuring safety throughout the generation process has become a critical challenge. We introduce PGuard, a native, streaming, and plug-in guardrail that transforms safety monitoring from an external serving dependency into an integrated capability of the backbone model. PGuard directly leverages the backbone's intermediate representations for token-level safety detection, without altering its original inference pathway or generation behavior. Specifically, dynamic layer gating selectively aggregates residual-stream representations across layers to extract safety-relevant signals during both prefill and autoregressive decoding. To balance detection accuracy and computational efficiency, PGuard supports multiple representation-modeling architectures, including a lightweight stateless variant and sequence-aware variants built on multi-scale causal EMA-attention and GRU-based recurrent modules. Its design also accounts for the execution characteristics of LLM serving frameworks, such as SGLang, optimizing computation and data access to minimize additional runtime and synchronization overhead. As a result, PGuard incurs only 0.82-2.26% end-to-end overhead on the hundred-billion-parameter backbone Qwen3.5-122B-A10B served by SGLang. Extensive evaluations across more than 30 benchmarks spanning text and multimodal safety, jailbreaks, cyber and CBRN risks, multilingual scenarios, and real-world traffic demonstrate state-of-the-art performance among native guardrails. On text queries with Qwen3.5-9B, PGuard achieves an average F1 score of 0.836, approaching dedicated external guardrails, while supporting deployment-time configuration of category-specific thresholds and enforcement actions.
This position paper argues that the evaluation of modern visual processing systems should no longer be driven primarily by single-metric image quality assessment benchmarks, particularly in the era of generative and perception-oriented methods. Image restoration exemplifies this divergence: while objective IQA metrics enable reproducible, scalable evaluation, they have increasingly drifted apart from human perception and user preferences. We contend that this mismatch risks constraining innovation and misguiding research progress across visual processing tasks. Rather than rejecting metrics altogether, this paper calls for a rebalancing of evaluation paradigms, advocating a more human-centered, context-aware, and fine-grained approach to assessing the visual models' outcomes.
Kai Zou, Ziqi Huang, Yuhao Dong, Shulin Tian Nanyang Technological University, Dian Zheng The Chinese University of Hong Kong, Hongbo Liu, Jingwen He, Bin Liu University of Science and Technology of China 等 10 位作者
Unified multimodal models aim to jointly enable visual understanding and generation, yet current benchmarks rarely examine their true integration. Existing evaluations either treat the two abilities in isolation or overlook tasks that inherently couple them. To address this gap, we present Uni-MMMU, a comprehensive and discipline-aware benchmark that systematically unfolds the bidirectional synergy between generation and understanding across eight reasoning-centric domains, including science, coding, mathematics, and puzzles. Each task is bidirectionally coupled, demanding models to (i) leverage conceptual understanding to guide precise visual synthesis, or (ii) utilize generation as a cognitive scaffold for analytical reasoning. Uni-MMMU incorporates verifiable intermediate reasoning steps, unique ground truths, and a reproducible scoring protocol for both textual and visual outputs. Through extensive evaluation of state-of-the-art unified, generation-only, and understanding-only models, we reveal substantial performance disparities and cross-modal dependencies, offering new insights into when and how these abilities reinforce one another, and establishing a reliable foundation for advancing unified models.
尚无 AI 解读，展示原文摘要
cs.CL · cs.CV
Proceedings of the 64th Annual Meeting of the Association for Computational Linguistics (Volume 1: Long Papers) · 2026 · 正式发表
Yuanfei Wang Peking University, Xinju Huang, Fangwei Zhong, Yaodong Yang Peking University, Yizhou Wang Peking University, Yuanpei Chen Peking University, Hao Dong Peking University
Effective real-world human–agent interactions, such as household robotic services, are often long-term and repeated. Beyond executing tasks, agents are expected to quickly become familiar with individual users. In everyday use, people do not want to repeatedly specify precise instructions. Instead, they prefer agents that adapt to their habits and preferences over interaction while minimizing communication effort. This poses a key challenge: enabling agents to rapidly align with user needs and provide proactive assistance within limited communication. To study this problem in a realistic embodied setting, we first introduce HA-Desire, a home assistance simulation environment. HA-Desire features an LLM-driven proxy user with value-driven preferences and natural language behavior, enabling systematic evaluation of how agents adapt to users across interactions and satisfy their desires. We further propose FAMER, a framework that integrates goal-relevant memory, desire-centered mental reasoning, and efficient communication to infer user preferences from interaction while reducing unnecessary dialogue. Experiments across embodied household tasks and different LLMs show that FAMER improves both task success and interaction efficiency compared to existing baselines, highlighting the importance of communication-efficient desire alignment for proactive embodied agents that support users without requiring frequent instructions.
尚无 AI 解读，展示原文摘要
cs.CL
Proceedings of the 64th Annual Meeting of the Association for Computational Linguistics (Volume 1: Long Papers) · 2026 · 正式发表