让下一篇重要论文，不再错过。

原文摘要

Prestress governs the stability, stiffness, and dynamic behavior of tensegrity structures, but it is not directly observable from sparse structural measurements, and it may decrease during service life. Under strong excitation, the cables may slacken and the dynamics become nonsmooth. Existing identification methods are limited to the taut regime, and physics-informed networks for tensegrities solve only the forward problem of predicting the response from known member parameters. This study formulates the inverse problem. Neural networks are trained on the equation-of-motion residual in constrained Cartesian coordinates, where the mass matrix is constant and the force densities enter linearly. The force densities, damping, and axial stiffness are trainable parameters, and the tension-only cable law is kept. A Fisher-information analysis shows, before inversion, which member parameters a record can determine. The method is tested on simulated planar tensegrity frames with up to five modules and a three-dimensional prism, and on measured records of a biomimetic leg and a full-scale tensegrity simplex. On the one-module frame, the identifiable force densities are recovered within 1.5% from noisy accelerations at half the free coordinates, on records with and without taut-slack transitions. Records with transitions determine members that taut records leave undetermined. On the five-module frame, a 16-cable two-span bridge, the median force-density error rises moderately, to 4.2%. On measured records, an identified spring stiffness is within 0.1% of its independently measured value on average, and the identified simplex prestress at 13 levels agrees with its cable force transducers to 2.9% root-mean-square.