跳到正文
研踪PaperTrail

论文库

检索计算机领域论文,按研究方向、作者或关键词筛选。

部分采集异常
正在读取账号与研究记录…

全站更新概况

+479新增论文
+361其中 AI 相关
+64已有论文修订
+95新增 AI 导读

arXiv 最近完成扫描:2026-11-16 01:34 · 全站最近入库:2026-11-16 21:56各信源进度 →

统计口径与数据新鲜度

统计 2026-11-16 04:40 — 2026-11-17 04:40(北京时间) · 点击数字查看对应简报;AI 相关包含在新增论文内。

最近完成检查:2026-11-16 01:34最近发现新增版本:2026-11-16 21:56库内论文最新更新时间:2026-11-14 02:59

每分钟刷新已保存的数据。空检查不代表采集异常;新收录可能包含历史论文。AI 导读按新增版本计数。

23,827 已收录论文19,941 AI 相关6,922 有修订112 HF 社区发现

浏览论文库

时间范围跟随排序:版本更新、本站收录或首次发表。最新收录可能包含历史论文。部分信源异常,查看状态 →

找到 1 篇论文 · 按版本更新时间排序上轮扫描起点 2026-11-16 01:33(北京时间)
新论文 · v1arXiv:2610.36862

Stiffness coefficients in granular micromechanics determined with three-point bending experiments and digital image correlation for a bimodulus material

Mohammad Mahdi Nayeban, Bilen Emek Abali, Reza Afshar, Francesco Fabbrocino, Anil Misra, Luca Placidi

原文摘要

This study presents an inverse analysis to determine the stiffness parameters of a bimodulus constitutive model formulated within a granular micromechanics framework. Full-field normal strain measurements are obtained by Digital Image Correlation (DIC) during three-point bending tests and are used as experimental input to a hybrid numerical optimization procedure. The experimental campaign is designed to ensure that the measured strain fields remain within the elastic regime. Since the identification is formulated as a nonlinear regression problem, a physically informed initial parameter set is constructed to guide the optimization toward mechanically meaningful values. An initial estimate of the compressive stiffness is first obtained from the available manufacturer data. The tension-compression stiffness asymmetry is then estimated from the experimentally measured neutral-axis shift, which provides a macroscopic signature of bimodulus material behavior in bending. These estimates define the initial parameter set, which is subsequently refined through a hybrid optimization procedure based on the full-field comparison of the experimental and numerical normal strain distributions. The identified parameter set enables the numerical model to reproduce more closely both the through-depth profile and the spatial distribution of the normal strain component over the selected surface region. These results demonstrate that full-field normal strain measurements provide an effective basis for identifying the stiffness parameters of bimodulus granular micromechanics models. The largest differences between the numerical and experimental strain fields are observed near the load-application region, where localized strain variations are induced by the concentrated load.

cs.CE