阿克曼导航中的规划器-控制器交互:匹配的仿真与硬件基准测试
Planner-Controller Interaction for Ackermann Navigation: A Matched Simulation and Hardware Benchmark
Moaiz Saeed, Marah Saleh, Mounis Shawgi, Mohamed Al Musleh
AI 速读 基于摘要
在1/10比例阿克曼转向车辆上,匹配仿真与硬件实验表明控制器排名可迁移,但规划器相关效应在仿真中预测不准。
cs.RO
查看原文摘要
Global planners and path-tracking controllers are often evaluated independently, although their interaction determines how a vehicle follows a planned path. Whether simulation accurately predicts the performance of specific planner-controller combinations on Ackermann-steered hardware remains uncertain. This study evaluated three geometric controllers (Regulated Pure Pursuit, Stanley, and Vector Pursuit) paired with two global planners (Hybrid A* and NavFn) on a 1/10-scale Quanser QCar and in a matched Gazebo simulation. Both environments used shared custom planning and control algorithms, matched route geometry and goals, ground-truth pose references, and a common evaluation pipeline. Five runs per configuration and environment yielded 60 benchmark runs. Controller rankings for tracking accuracy and command smoothness transferred consistently between environments, with Spearman correlations of 0.77-0.94. However, planner-dependent effects showed substantially weaker agreement. In simulation, planner selection changed the root-mean-square (RMS) angular acceleration of the commanded velocities by no more than 0.030 rad/s^2, whereas Hybrid A* increased it by 0.141-0.843 rad/s^2 on hardware, depending on the controller. These differences coincided with planner-dependent achieved speeds that the simulation's idealised longitudinal response did not reproduce. Mean controller computation times remained below 0.5 ms on the Jetson TX2. The findings demonstrate that agreement in controller rankings does not guarantee accurate prediction of planner-dependent performance for specific controller pairings on hardware, highlighting the importance of physical validation.