跳到正文
研踪PaperTrail

论文库

检索计算机领域论文,按研究方向、作者或关键词筛选。

部分采集异常
正在读取账号与研究记录…

全站更新概况

+1022新增论文
+813其中 AI 相关
+85已有论文修订
+95新增 AI 导读

arXiv 最近完成扫描:2026-11-17 04:58 · 全站最近入库:2026-11-17 13:07各信源进度 →

统计口径与数据新鲜度

统计 2026-11-16 15:16 — 2026-11-17 15:16(北京时间) · 点击数字查看对应简报;AI 相关包含在新增论文内。

最近完成检查:2026-11-17 04:58最近发现新增版本:2026-11-17 13:07库内论文最新更新时间:2026-11-16 17:16

每分钟刷新已保存的数据。空检查不代表采集异常;新收录可能包含历史论文。AI 导读按新增版本计数。

24,849 已收录论文20,754 AI 相关7,213 有修订112 HF 社区发现

浏览论文库

时间范围跟随排序:版本更新、本站收录或首次发表。最新收录可能包含历史论文。部分信源异常,查看状态 →

找到 4 篇论文 · 按版本更新时间排序上轮扫描起点 2026-11-17 04:57(北京时间)
版本更新 · v2arXiv:2611.10398

冷缓存下表格数据格式的测量:基于真实数据集的序列化、扫描与索引性能复现基准

Measuring Tabular Data Formats Cold: A Replicated Cold-Cache Benchmark of Serialization, Scan, and Index Performance on Real Datasets

Asra Fathima, Kristoffer Roberts

AI 速读 基于摘要

该研究在显式冷缓存、随机执行顺序和三次独立会话条件下,对两种真实数据集上的十五种表格数据格式与访问路径配置进行基准测试,并用统计检验分析性能差异。

cs.DB · cs.PF · cs.SE

查看原文摘要

Choosing a file format for tabular data is a routine engineering decision, yet published comparisons often time reads served from the operating-system page cache, use one session, or rely on a single synthetic dataset. This article benchmarks fifteen format and access-path configurations (CSV, JSON Lines, Pickle, Feather, Parquet, ORC, DuckDB, and SQLite, with several access paths) on two real public datasets, New York City taxi trips and United States airline on-time records, at 50,000 to 3 million rows. Every measurement uses an explicitly cold cache, randomized execution order, and three independent sessions (with restarts on the laptop), and is analyzed with bootstrap intervals and Holm-adjusted permutation tests. Parquet answered a filtered aggregation 2.6 to 11 times faster than CSV, while JSON Lines was 10 to 27 times slower. A secondary index made SQLite queries 2.6 to 4.8 times slower on randomly ordered data and helped only on data sorted by the filtered column, at low selectivity. A row filter inside the Parquet reader was significantly faster than a projected scan on flight data from one million rows and on both datasets at three million, and row-group skipping needs several row groups, which the default writer produced only at 3 million rows. A 4 GB Linux host ran out of memory on configurations that a 24 GB laptop completed and reversed some orderings, such as Pickle versus Parquet. Code, derived data, and raw timings are released.

新论文 · v1arXiv:2611.12027

An open source Python code for three-dimensional topology optimization in single precision on a consumer GPU

Leonilson Toffoli Pedrini, Rodolfo G. M. Andrade, Rafael M. Ferro

原文摘要

Three-dimensional topology optimization solves linear systems with millions of unknowns at every design iteration. Consumer graphics cards run far faster in single than in double precision, and open codes for them mostly address minimum compliance. This educational article presents TOF3D, an open source Python code for density-based topology optimization in single precision on one consumer GPU. It solves four classes of problems: stress constrained minimum compliance, robust minimum compliance against manufacturing errors, compliant mechanisms and bone-like porous infill. The stiffness operator is applied without assembly, and the conjugate gradient method is preconditioned by geometric multigrid. Rounding the element matrix to single precision gave rigid body motions a spurious energy and changed compliances by up to 5.4%. Forming the element products from differences of nodal displacements reduced this error to $1.3\times 10^{-5}$ at no cost in time. Adjoint sensitivities agreed with finite differences to within $1.7\times 10^{-6}$, and the solutions agreed with Ansys Mechanical APDL to within $4.1\times 10^{-10}$ with the same element. On an RTX 3060 with 12 GB, one design iteration of a cantilever took 0.46 s with 0.5 million elements and 15 s with 33.5 million. On the same card and problem, an open GPU code that applies its operator in double precision took 3.7 and 21 s with 0.5 and 4.2 million elements and ran out of memory on larger meshes. Eight cases fixed in a protocol before the runs took 9 to 35 minutes each with 4.2 to 5.2 million elements.

cs.CE · cs.MS

新论文 · v1arXiv:2611.04299

Can Benign Skills Induce Misaligned Behavior in LLM Agents?

Xuanye Zhang, Yongsen Zheng, Kaiyu Zhou, Bowen Shen, Haoran Ou, Zhuqin Xu, Tianwei Zhang, Kwok-Yan Lam

原文摘要

LLM agents increasingly rely on reusable skills to plan tasks, invoke tools, recover from errors, and complete workflows without modifying model parameters. Although these skills are typically developed to enhance benign tasks, they may also make an agent more capable of executing procedures for harmful purposes. We study this risk, which we call skill-induced behavioral misalignment: adding benign skills may cause an agent to execute external actions that violate safety requirements. We first conduct a systematic study to validate the existence of this phenomenon. It compares agents with and without benign skills across five LLM backbones and three benchmarks under matched requests. On average, skill augmentation improves benign task accuracy by 10.3 percentage points (pp), but also increases unsafe action rate (UAR) by 10.3 pp. The regression also occurs with skills curated by experts. A paired trajectory analysis shows that 24 of 50 newly unsafe trajectories fail to complete the harmful objective, revealing violations that task completion alone would miss. We further disclose multiple factors and scenarios that could exacerbate this risk. (1) Evolving skills with benign feedback can amplify unsafe execution; (2) This regression is more pronounced when retrieved skills are matched to task and contain procedural guidance; (3) Distilling benign experience into reusable skills yield higher UAR compared with their source trajectories. (4) A guard that checks proposed tool actions before execution reduces violations while retaining gains on benign tasks. All these findings confirm the significance of skill-induced behavioral misalignment, and the urgent need for new mitigation solutions.

cs.CR

新论文 · v1arXiv:2610.38201

From Natural Language to Real Schematics: An Automated Workflow for Power Electronics Schematic Synthesis

Bowen Su, Huan Chen, Jiahua Ying, Ran Ou, Weilong Chen, Li Xue, Kai Sun

原文摘要

Designing power electronics converters traditionally requires intensive human expertise across topology sizing, commercial component selection, circuit simulation verification, and schematic drafting. While Large Language Models (LLMs) show promise in electronic design automation (EDA), applying standalone LLMs directly to board-level power electronics schematic synthesis suffers from severe engineering hallucinations, including inaccurate analytical sizing, fabricated or mismatched component part numbers, violated voltage derating margins, and broken topological connectivity. In this paper, we propose a Bounded Dual-Loop Automated Schematic Synthesis Framework that translates natural language specifications into verified, editable KiCad schematics and manufacturing deliverables. Our workflow integrates six stages across three functional columns: (1) requirement parsing and knowledge-driven power stage synthesis covering non-isolated (Buck, Boost) and isolated/resonant (Flyback, DAB, half-bridge LLC) topologies; (2) contract- and evidence-coordinated component selection grounded in distributor APIs and OEM datasheets, coupled with closed-loop ngspice transient verification and stress feedback; and (3) modular control hardware integration and multi-format deliverable generation featuring native KiCad netlist round-trip verification. End-to-end case studies on a 24-36V to 12V,2A Buck converter (29 positions, 83 verified terminals) and an isolated 48V to 24V, 0.5A, Dual-Active Bridge (DAB) converter (87 positions, 341 verified terminals), alongside comparative evaluations against a Vanilla LLM baseline, demonstrate that our framework improves component verification coverage from 22.2 to 98.6, nominal value consistency from 0 to 97.7, and SPICE simulation pass rates from 0 to 100.

cs.AI