跳到正文
研踪PaperTrail

论文库

检索计算机领域论文,按研究方向、作者或关键词筛选。

部分采集异常
正在读取账号与研究记录…

全站更新概况

+0新增论文
+0其中 AI 相关
+0已有论文修订
+91新增 AI 导读

arXiv 最近完成扫描:2026-11-22 08:44 · 全站最近入库:2026-11-21 12:19各信源进度 →

统计口径与数据新鲜度

统计 2026-11-21 12:27 — 2026-11-22 12:27(北京时间) · 点击数字查看对应简报;AI 相关包含在新增论文内。

最近完成检查:2026-11-22 08:44最近发现新增版本:2026-11-21 12:19库内论文最新更新时间:2026-11-20 02:59

每分钟刷新已保存的数据。空检查不代表采集异常;新收录可能包含历史论文。AI 导读按新增版本计数。

29,158 已收录论文24,181 AI 相关8,992 有修订112 HF 社区发现

浏览论文库

时间范围跟随排序:版本更新、本站收录或首次发表。最新收录可能包含历史论文。部分信源异常,查看状态 →

找到 1 篇论文 · 按版本更新时间排序上轮扫描起点 2026-11-22 08:42(北京时间)
新论文 · v1arXiv:2611.25977

Blind tests of a simple-body model of submarine target strength on open benchmarks

Sunil Tyagi

原文摘要

Finite-element and boundary-element models of a submarine's sonar echo need a mesh and a solver, and their cost grows quickly with frequency. SSR-Sim takes an analytical route. The hull is cut into a few simple bodies, the echo of each is a closed-form result of geometrical acoustics or of the Kirchhoff approximation, the surface enters through a plane-wave reflection coefficient, and the echoes add in energy. This paper describes the method, including the reduction of a hull and its sail to simple bodies, and tests it on three open cases. (1) The reflection coefficient of a 50 mm rubber tile on steel plating, computed with finite elements by Yang et al., is reproduced to 0.02 rms or better at incidence angles from 0° to 75° once the layer is allowed to refract. (2) For the rigid full-scale BeTSSi submarine at 1 kHz, a prediction fixed before the reference was opened agrees with the boundary-element results of Venås and Kvamsdal to within 0.7 dB in every aspect sector from the bow to 150°; in the stern sector it is 5 dB high. (3) For a 1:15 BeTSSi model with 10 mm tiles measured in a lake, a second blind prediction is within -3.1, +1.4 and -0.5 dB of the measured level over aspects 0-120° at 5, 15 and 20 kHz, against -3.1, +3.1 and +3.5 dB for the Kirchhoff-finite-element computation published with the measurement. At 10 kHz, on a resonance of the tile, the prediction is 6.9 dB low, and in the bow sector it is 7 dB or more low at every frequency. The tests cover the specular component and the coating model only. The failures show what such a model lacks: edge diffraction and the returns that set the off-beam floor of a real model.

eess.AS · cs.SD · eess.SP