跳到正文
研踪PaperTrail
← 研踪 PaperTrail

arXiv:2611.10318 · v1

AI-Driven Repair of Missing Automotive Components

首次提交 2026-11-07 07:34
版本更新 2026-11-07 07:34
雷达观测 2026-11-10 10:11
arXiv ↗PDF ↗

摘要

Due to supply constraints, replacing damaged automotive components can be expensive and time-consuming, while replacing the entire component can be wasteful when much of it remains usable. This paper presents a pipeline to investigate whether missing geometry can be reconstructed as a repair patch using paired observations of the intact models and synthetically damaged components. Noise-free color, depth, and silhouette images were produced using the camera viewpoints. Depth differences were then used to identify the potential missing regions, while multi-view voxel reconstruction was used to estimate the missing portion. A pretrained DINOv2 model was also added to validate missing candidates and determine whether pretrained visual features could improve reconstruction. We tested the pipeline on 20 automotive CAD models, each with a synthetically removed portion. Each model was tested under four different conditions using two reconstruction methods for a total of 160 trials. The predictions were compared with the missing geometry of the unchanged ground-truth using predefined thresholds of the voxel intersection-over-union over 0.85 and the absolute relative volume error less than 15%. Of the 160 experimental trials, 109 of them satisfied both thresholds. Geometry-only reconstruction passed 16 of 20 components with eight views but only 10 of 20 with four adjacent views. Further analysis showed that 24 out of the 37 failed reconstructions could be categorized as unsuccessful because extra material was incorrectly added to areas that should have been empty. The implementation of DINOv2 into the pipeline did not improve the overall reconstruction accuracy and made prediction generation slower. For 13 verified tests, printing only the repaired sections instead of the entire parts reduced filament use by 93.08% and printing time by 89.39% based on the median results.

作者备注:6 pages, 4 figures

AI 论文解读

基于摘要 · 非全文审阅

此版本尚未生成 AI 解读。解读由后台任务生成并按论文版本保存,登录后共享已有结果。

版本差异

目前只收录了一个版本。收录下一版后,可以对照标题、作者、分类和摘要。

观测到的版本

相邻记录可能跳过中间版本;首次发现 v2 及以上也会标为版本更新。

v1 · 2026-11-07 07:34 · 最新观测版本

AI-Driven Repair of Missing Automotive Components

Due to supply constraints, replacing damaged automotive components can be expensive and time-consuming, while replacing the entire component can be wasteful when much of it remains usable. This paper presents a pipeline to investigate whether missing geometry can be reconstructed as a repair patch using paired observations of the intact models and synthetically damaged components. Noise-free color, depth, and silhouette images were produced using the camera viewpoints. Depth differences were then used to identify the potential missing regions, while multi-view voxel reconstruction was used to estimate the missing portion. A pretrained DINOv2 model was also added to validate missing candidates and determine whether pretrained visual features could improve reconstruction. We tested the pipeline on 20 automotive CAD models, each with a synthetically removed portion. Each model was tested under four different conditions using two reconstruction methods for a total of 160 trials. The predictions were compared with the missing geometry of the unchanged ground-truth using predefined thresholds of the voxel intersection-over-union over 0.85 and the absolute relative volume error less than 15%. Of the 160 experimental trials, 109 of them satisfied both thresholds. Geometry-only reconstruction passed 16 of 20 components with eight views but only 10 of 20 with four adjacent views. Further analysis showed that 24 out of the 37 failed reconstructions could be categorized as unsuccessful because extra material was incorrectly added to areas that should have been empty. The implementation of DINOv2 into the pipeline did not improve the overall reconstruction accuracy and made prediction generation slower. For 13 verified tests, printing only the repaired sections instead of the entire parts reduced filament use by 93.08% and printing time by 89.39% based on the median results.

查看此版本解读 →查看此版本原文 ↗