跳到正文
研踪PaperTrail
← 研踪 PaperTrail

arXiv:2611.18422 · v1

The State Is Not the Bottleneck: A Paged-State Gated-DeltaNet Tile on a Tri-Mode Multicast Mesh, Bit-Exact from RTL to Silicon

首次提交 2026-11-14 01:01
版本更新 2026-11-14 01:01
雷达观测 2026-11-16 11:41
arXiv ↗PDF ↗

摘要

Linear-attention language models replace a growing key-value cache with a recurrent state of fixed size. On an edge FPGA, this state can exceed the on-chip memory and must be paged to external memory. This paper asks whether such paging dominates the cost of decoding (generating tokens). We built a hardware tile that computes one complete layer of a custom 369-million-parameter hybrid Gated DeltaNet model on an Agilex 5 FPGA and pages its recurrent state. The model state needs 6.2 MiB, whereas the device has 0.87 MiB of block memory. Paging adds 26.0 MB of memory traffic per decoded token, at most 11.2 percent of the calculated total. On the board at 75 MHz, with synthetic weights, one token takes 11.15 ms in this layer. The matrix-vector products with the weights take about 62 percent of this time and the state phase, including the paging, 13 percent. The tile is one node of a multicast mesh of tri-mode processing elements. We measure the error of the fixed-point arithmetic against floating point and check that the hardware agrees bit for bit with a fixed-point reference. In simulation, the state logic agrees with the reference on all 18 recurrent layers. On the board, six builds pass all 30 runs of 64 tokens and two runs of 1,024 tokens. For this model and memory interface, the delivery of the weights limits the decoding performance, and the recurrent state does not. State paging is therefore practical for such a model on an edge FPGA.

作者备注:12 pages, 5 figures, 6 tables. The technical supplement is included as an ancillary file. This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may no longer be accessible

AI 论文解读

基于摘要 · 非全文审阅

此版本尚未生成 AI 解读。解读由后台任务生成并按论文版本保存,登录后共享已有结果。

版本差异

目前只收录了一个版本。收录下一版后,可以对照标题、作者、分类和摘要。

观测到的版本

相邻记录可能跳过中间版本;首次发现 v2 及以上也会标为版本更新。

v1 · 2026-11-14 01:01 · 最新观测版本

The State Is Not the Bottleneck: A Paged-State Gated-DeltaNet Tile on a Tri-Mode Multicast Mesh, Bit-Exact from RTL to Silicon

Linear-attention language models replace a growing key-value cache with a recurrent state of fixed size. On an edge FPGA, this state can exceed the on-chip memory and must be paged to external memory. This paper asks whether such paging dominates the cost of decoding (generating tokens). We built a hardware tile that computes one complete layer of a custom 369-million-parameter hybrid Gated DeltaNet model on an Agilex 5 FPGA and pages its recurrent state. The model state needs 6.2 MiB, whereas the device has 0.87 MiB of block memory. Paging adds 26.0 MB of memory traffic per decoded token, at most 11.2 percent of the calculated total. On the board at 75 MHz, with synthetic weights, one token takes 11.15 ms in this layer. The matrix-vector products with the weights take about 62 percent of this time and the state phase, including the paging, 13 percent. The tile is one node of a multicast mesh of tri-mode processing elements. We measure the error of the fixed-point arithmetic against floating point and check that the hardware agrees bit for bit with a fixed-point reference. In simulation, the state logic agrees with the reference on all 18 recurrent layers. On the board, six builds pass all 30 runs of 64 tokens and two runs of 1,024 tokens. For this model and memory interface, the delivery of the weights limits the decoding performance, and the recurrent state does not. State paging is therefore practical for such a model on an edge FPGA.

查看此版本解读 →查看此版本原文 ↗