跳到正文
研踪PaperTrail
← 研踪 PaperTrail

arXiv:2611.19318 · v1

Residual Reinforcement Learning for Visual Servo Control with Zero-Shot Sim-to-Real Transfer

首次提交 2026-11-14 18:25
版本更新 2026-11-14 18:25
雷达观测 2026-11-17 12:06
arXiv ↗PDF ↗

摘要

We address tracking a moving object on a conveyor with a Franka Emika Panda robot arm, despite an imprecise digital twin, measurement errors, and noise. Our novel approach augments a loop-shaped inverse-Jacobian PI controller with a residual policy learned via Soft Actor-Critic in the digital twin. A delay-compensated Kalman filter fuses out-of-sequence camera measurements to provide latency-aware moving target position estimates. We compare the achieved performance to a performance bound for a class of model-based controllers derived from a frequency-domain sensitivity analysis, quantifying the minimum achievable error imposed by uncertain kinematic model mismatch. Simulation and hardware experiments indicate that our residual policy drives tracking error below the bound. Across conveyor speeds (27.9-41.8 mm/s), our method reduces mean tracking errors from 1.1-1.4 mm (baseline inverse-Jacobian PI) to 0.3-0.7 mm. These results show that learning residual corrections in a limited-fidelity simulator, combined with delay compensation, can substantially improve model-based control under modeling and measurement uncertainties while maintaining reliable sim-to-real transfer.

作者备注:This manuscript is currently under review in IEEE Robotics and Automation Letters (RA-L)

AI 论文解读

基于摘要 · 非全文审阅

此版本尚未生成 AI 解读。解读由后台任务生成并按论文版本保存,登录后共享已有结果。

版本差异

目前只收录了一个版本。收录下一版后,可以对照标题、作者、分类和摘要。

观测到的版本

相邻记录可能跳过中间版本;首次发现 v2 及以上也会标为版本更新。

v1 · 2026-11-14 18:25 · 最新观测版本

Residual Reinforcement Learning for Visual Servo Control with Zero-Shot Sim-to-Real Transfer

We address tracking a moving object on a conveyor with a Franka Emika Panda robot arm, despite an imprecise digital twin, measurement errors, and noise. Our novel approach augments a loop-shaped inverse-Jacobian PI controller with a residual policy learned via Soft Actor-Critic in the digital twin. A delay-compensated Kalman filter fuses out-of-sequence camera measurements to provide latency-aware moving target position estimates. We compare the achieved performance to a performance bound for a class of model-based controllers derived from a frequency-domain sensitivity analysis, quantifying the minimum achievable error imposed by uncertain kinematic model mismatch. Simulation and hardware experiments indicate that our residual policy drives tracking error below the bound. Across conveyor speeds (27.9-41.8 mm/s), our method reduces mean tracking errors from 1.1-1.4 mm (baseline inverse-Jacobian PI) to 0.3-0.7 mm. These results show that learning residual corrections in a limited-fidelity simulator, combined with delay compensation, can substantially improve model-based control under modeling and measurement uncertainties while maintaining reliable sim-to-real transfer.

查看此版本解读 →查看此版本原文 ↗