跳到正文
研踪PaperTrail
← 研踪 PaperTrail

arXiv:2611.22767 · v1

Levio: Smart Actuated Back-Exoskeleton via Retrofit of a Commercial Passive Device

首次提交 2026-11-17 21:34
版本更新 2026-11-17 21:34
雷达观测 2026-11-18 19:41
arXiv ↗PDF ↗

摘要

Passive back exoskeletons show promising benefits for reducing occupational musculoskeletal disorders. However, their assistance cannot be modulated towards the task requirements. Active exoskeletons offer opportunities for pose-specific assistance, but, developing these systems from scratch for research can be time consuming. Therefore, here, we present an accelerated design pipeline that retrofits a Commercial Off-The-Shelf (COTS) passive back exoskeleton, Laevo Flex, with COTS actuation (CubeMars AK10-9) and sensing (IMUs and load-cell) paradigms. Levio was able to provide assistance based on the user's pose. Nine participants performed stoop lifting with the original Laevo and the retrofit Levio system, in transparent and assisted modes. Compared to Laevo, Levio modulated the assistance provided between the bending and lifting phases of the stoop task. The passive assistance offered by Laevo was 25.2±4.325.2 \pm 4.3 Nm and 30.6±9.530.6 \pm 9.5 Nm respectively during the bending and lifting phases of the stoop tasks. Levio reduced the resistive torque during bending to 17.9±4.617.9 \pm 4.6 Nm and offered increased assistance of 37.7±6.437.7 \pm 6.4 Nm during lifting. Moreover, participants reported higher usability scores and lowest mean global discomfort score while using the Levio when compared to Laevo. These benefits demonstrates retrofitting passive exoskeletons is a viable direction for rapid prototyping of wearable exoskeletons for lifting.

AI 论文解读

基于摘要 · 非全文审阅

此版本尚未生成 AI 解读。解读由后台任务生成并按论文版本保存,登录后共享已有结果。

版本差异

目前只收录了一个版本。收录下一版后,可以对照标题、作者、分类和摘要。

观测到的版本

相邻记录可能跳过中间版本;首次发现 v2 及以上也会标为版本更新。

v1 · 2026-11-17 21:34 · 最新观测版本

Levio: Smart Actuated Back-Exoskeleton via Retrofit of a Commercial Passive Device

Passive back exoskeletons show promising benefits for reducing occupational musculoskeletal disorders. However, their assistance cannot be modulated towards the task requirements. Active exoskeletons offer opportunities for pose-specific assistance, but, developing these systems from scratch for research can be time consuming. Therefore, here, we present an accelerated design pipeline that retrofits a Commercial Off-The-Shelf (COTS) passive back exoskeleton, Laevo Flex, with COTS actuation (CubeMars AK10-9) and sensing (IMUs and load-cell) paradigms. Levio was able to provide assistance based on the user's pose. Nine participants performed stoop lifting with the original Laevo and the retrofit Levio system, in transparent and assisted modes. Compared to Laevo, Levio modulated the assistance provided between the bending and lifting phases of the stoop task. The passive assistance offered by Laevo was 25.2±4.325.2 \pm 4.3 Nm and 30.6±9.530.6 \pm 9.5 Nm respectively during the bending and lifting phases of the stoop tasks. Levio reduced the resistive torque during bending to 17.9±4.617.9 \pm 4.6 Nm and offered increased assistance of 37.7±6.437.7 \pm 6.4 Nm during lifting. Moreover, participants reported higher usability scores and lowest mean global discomfort score while using the Levio when compared to Laevo. These benefits demonstrates retrofitting passive exoskeletons is a viable direction for rapid prototyping of wearable exoskeletons for lifting.

查看此版本解读 →查看此版本原文 ↗