跳到正文
研踪PaperTrail
← 研踪 PaperTrail

arXiv:2611.24191 · v1

High-Precision Docking of Differential-Drive Mobile Robots Through LiDAR and Vision Collaboration

首次提交 2026-11-18 18:28
版本更新 2026-11-18 18:28
雷达观测 2026-11-19 15:04
arXiv ↗PDF ↗

摘要

Precise docking requires a differential-drive robot to correct lateral offset through coupled rotation and translation within a short approach distance. We combine global navigation with terminal control using complementary LiDAR and visual observations. A line fitted to the cabinet front gives normal distance and heading. An AprilTag identifies the workstation; intersecting its center ray with the LiDAR plane determines tangential position. Taught observations define the docking reference and can cancel repeatable fixed biases under unchanged mounting and geometry. Lateral pre-alignment and continuous visual servoing coordinate the approach, with predictive stopping to account for low-speed actuation lag. Across two sessions using the same navigation and docking code at five workstations on Robot 2, all 111 tasks completed, including 101 on the first attempt. Relative to the taught observations, onboard longitudinal, lateral and heading residual root-mean-square values were 1.51 mm, 5.93 mm and 0.238 degrees, respectively. Joint acceptance within plus or minus 10 mm per position axis and plus or minus 1 degree heading was 96.4% (107/111), or 95.5% (106/111) with a plus or minus 0.5 degree heading limit.

AI 论文解读

基于摘要 · 非全文审阅

此版本尚未生成 AI 解读。解读由后台任务生成并按论文版本保存,登录后共享已有结果。

版本差异

目前只收录了一个版本。收录下一版后,可以对照标题、作者、分类和摘要。

观测到的版本

相邻记录可能跳过中间版本;首次发现 v2 及以上也会标为版本更新。

v1 · 2026-11-18 18:28 · 最新观测版本

High-Precision Docking of Differential-Drive Mobile Robots Through LiDAR and Vision Collaboration

Precise docking requires a differential-drive robot to correct lateral offset through coupled rotation and translation within a short approach distance. We combine global navigation with terminal control using complementary LiDAR and visual observations. A line fitted to the cabinet front gives normal distance and heading. An AprilTag identifies the workstation; intersecting its center ray with the LiDAR plane determines tangential position. Taught observations define the docking reference and can cancel repeatable fixed biases under unchanged mounting and geometry. Lateral pre-alignment and continuous visual servoing coordinate the approach, with predictive stopping to account for low-speed actuation lag. Across two sessions using the same navigation and docking code at five workstations on Robot 2, all 111 tasks completed, including 101 on the first attempt. Relative to the taught observations, onboard longitudinal, lateral and heading residual root-mean-square values were 1.51 mm, 5.93 mm and 0.238 degrees, respectively. Joint acceptance within plus or minus 10 mm per position axis and plus or minus 1 degree heading was 96.4% (107/111), or 95.5% (106/111) with a plus or minus 0.5 degree heading limit.

查看此版本解读 →查看此版本原文 ↗