← 研踪 PaperTrailarXiv:2611.26083 · v1
Reference-Twist-Based Velocity-Domain Spatiotemporal Calibration for mmWave Radar, Event Camera, and IMU
首次提交 2026-11-19 21:24
版本更新 2026-11-19 21:24
雷达观测 2026-11-20 16:53
摘要
Multi-sensor navigation requires a common spatial and temporal basis, but geometric calibration relies on targets, features, point clouds, or pose associations that are difficult to establish across mmWave radars, event cameras, and inertial measurement units (IMUs). These sensors nevertheless share rigid-body motion. This paper formulates reference-conditioned velocity-domain spatiotemporal calibration for a rigid suite of two mmWave radars, one event camera, and two IMUs. Given a trusted reference body twist, radar Doppler, event normal flow, and inertial measurements are regressed against the same motion to estimate relative rotations, lever arms, time offsets, and sensor-specific bias and scale without artificial targets, structure from motion, or cross-modal point-cloud registration. The reference is treated as a conditioning input rather than a sensor to be calibrated. We compare joint and reference- conditioned estimation, derive conditional identifiability and CRLB-level covariance and bias bounds, and state the operating conditions under which conditioning is informative. Indoor and forest recordings with axis-separated motion evaluate initial- ization, temporal alignment, motion degeneracy, reference-input sensitivity, and residual consistency. Because the reference does not add physical observability, the estimates remain conditional on reference accuracy, synchronization, motion excitation, and projection diversity.
作者备注:17 pages, 12 figures. Code: https://anonymous.4open.science/r/xxxx
观测到的版本
相邻记录可能跳过中间版本;首次发现 v2 及以上也会标为版本更新。
v1 · 2026-11-19 21:24 · 最新观测版本
Reference-Twist-Based Velocity-Domain Spatiotemporal Calibration for mmWave Radar, Event Camera, and IMU
Multi-sensor navigation requires a common spatial and temporal basis, but geometric calibration relies on targets, features, point clouds, or pose associations that are difficult to establish across mmWave radars, event cameras, and inertial measurement units (IMUs). These sensors nevertheless share rigid-body motion. This paper formulates reference-conditioned velocity-domain spatiotemporal calibration for a rigid suite of two mmWave radars, one event camera, and two IMUs. Given a trusted reference body twist, radar Doppler, event normal flow, and inertial measurements are regressed against the same motion to estimate relative rotations, lever arms, time offsets, and sensor-specific bias and scale without artificial targets, structure from motion, or cross-modal point-cloud registration. The reference is treated as a conditioning input rather than a sensor to be calibrated. We compare joint and reference- conditioned estimation, derive conditional identifiability and CRLB-level covariance and bias bounds, and state the operating conditions under which conditioning is informative. Indoor and forest recordings with axis-separated motion evaluate initial- ization, temporal alignment, motion degeneracy, reference-input sensitivity, and residual consistency. Because the reference does not add physical observability, the estimates remain conditional on reference accuracy, synchronization, motion excitation, and projection diversity.
查看此版本解读 →查看此版本原文 ↗