跳到正文
研踪PaperTrail
← 研踪 PaperTrail

arXiv:2611.26146 · v1

A Practical Proprioceptive Data Collection Utility for the Unitree GO1

首次提交 2026-11-19 22:02
版本更新 2026-11-19 22:02
雷达观测 2026-11-20 16:53
arXiv ↗PDF ↗

摘要

The Unitree Go1 is a widely used platform for legged robotics research, yet collecting proprioceptive data from it is unnecessarily difficult: the Unitree SDK is sparsely documented, and ROS1 (Robot Operating System), the Go1's native middleware, is fully deprecated. We present an open-source graphical utility that enables researchers to reliably record proprioceptive data from the Go1, including joint states, IMU (Inertial Measurement Unit) readings, foot force sensor data, and gyroscope measurements, without requiring ROS expertise. The tool provides a simple GUI (Graphical User Interface) for starting, stopping, and labeling recordings in real time. The contribution of this paper is the collection utility. We characterize the acquisition quality of 51 recordings collected with it, including the achieved sampling rate and repeated samples. As a secondary, deliberately modest check that the data is useful, we train a terrain classifier on it. The results are weak: a Temporal Convolutional Network reaches about 38% accuracy on held-out recordings across ten terrain classes (10% would be chance), and a window-level split that ignores recording boundaries inflates the same measurement to about 99%. We report this as a demonstration that the logged signals carry terrain information, not as a competitive classifier. The utility is designed to lower the barrier to collecting Go1 proprioceptive data without ROS.

AI 论文解读

基于摘要 · 非全文审阅

此版本尚未生成 AI 解读。解读由后台任务生成并按论文版本保存,登录后共享已有结果。

版本差异

目前只收录了一个版本。收录下一版后,可以对照标题、作者、分类和摘要。

观测到的版本

相邻记录可能跳过中间版本;首次发现 v2 及以上也会标为版本更新。

v1 · 2026-11-19 22:02 · 最新观测版本

A Practical Proprioceptive Data Collection Utility for the Unitree GO1

The Unitree Go1 is a widely used platform for legged robotics research, yet collecting proprioceptive data from it is unnecessarily difficult: the Unitree SDK is sparsely documented, and ROS1 (Robot Operating System), the Go1's native middleware, is fully deprecated. We present an open-source graphical utility that enables researchers to reliably record proprioceptive data from the Go1, including joint states, IMU (Inertial Measurement Unit) readings, foot force sensor data, and gyroscope measurements, without requiring ROS expertise. The tool provides a simple GUI (Graphical User Interface) for starting, stopping, and labeling recordings in real time. The contribution of this paper is the collection utility. We characterize the acquisition quality of 51 recordings collected with it, including the achieved sampling rate and repeated samples. As a secondary, deliberately modest check that the data is useful, we train a terrain classifier on it. The results are weak: a Temporal Convolutional Network reaches about 38% accuracy on held-out recordings across ten terrain classes (10% would be chance), and a window-level split that ignores recording boundaries inflates the same measurement to about 99%. We report this as a demonstration that the logged signals carry terrain information, not as a competitive classifier. The utility is designed to lower the barrier to collecting Go1 proprioceptive data without ROS.

查看此版本解读 →查看此版本原文 ↗