← 研踪 PaperTrailarXiv:2409.20184 · v4
Adaptive Collision Sensitivity for Efficient and Safe Human-Robot Collaboration
首次提交 2024-09-30 18:52
版本更新 2026-11-06 23:50
雷达观测 2026-11-09 13:22
摘要
What is considered safe for a robot operator during physical human-robot collaboration (HRC) is specified in corresponding HRC standards (e.g., ISO 10218-2:2025). The regime that allows collisions between the moving robot and the operator, called Power and Force Limiting (PFL), restricts the permissible contact forces. Using the same fixed contact thresholds on the entire robot surface results unnecessary productivity losses, as the robot needs to stop even when impact forces are within limits. Here we present a framework that decides whether the robot should interrupt motion based on estimated collision force computed individually for different parts of the robot body and dynamically on the fly, based on the Effective Mass (EM) of each robot link. We performed experiments on a simulated and real collaborative robot arm (UR10e) with sensitive skin (AIRSKIN) for collision detection and isolation. To demonstrate the generality of our method, we added experiments on simulated KUKA LBR iiwa robot, where collision sensing draws on joint torque sensing. On a mock pick-and-place scenario with both transient and quasi-static collisions, we show an increase in productivity over 45% from using the standard approach. The method is applicable to any robot for which the EF can be calculated.
作者备注：Accepted to Advanced Intelligent Systems
观测到的版本
相邻记录可能跳过中间版本；首次发现 v2 及以上也会标为版本更新。
v4 · 2026-11-06 23:50 · 最新观测版本
Adaptive Collision Sensitivity for Efficient and Safe Human-Robot Collaboration
What is considered safe for a robot operator during physical human-robot collaboration (HRC) is specified in corresponding HRC standards (e.g., ISO 10218-2:2025). The regime that allows collisions between the moving robot and the operator, called Power and Force Limiting (PFL), restricts the permissible contact forces. Using the same fixed contact thresholds on the entire robot surface results unnecessary productivity losses, as the robot needs to stop even when impact forces are within limits. Here we present a framework that decides whether the robot should interrupt motion based on estimated collision force computed individually for different parts of the robot body and dynamically on the fly, based on the Effective Mass (EM) of each robot link. We performed experiments on a simulated and real collaborative robot arm (UR10e) with sensitive skin (AIRSKIN) for collision detection and isolation. To demonstrate the generality of our method, we added experiments on simulated KUKA LBR iiwa robot, where collision sensing draws on joint torque sensing. On a mock pick-and-place scenario with both transient and quasi-static collisions, we show an increase in productivity over 45% from using the standard approach. The method is applicable to any robot for which the EF can be calculated.
查看此版本解读 →查看此版本原文 ↗