← 研踪 PaperTrailarXiv:2507.06174 · v8
Design and Experimental Validation of Sensorless 4-Channel Bilateral Teleoperation for Low-Cost Manipulators
首次提交 2025-07-09 00:54
版本更新 2026-11-18 21:22
雷达观测 2026-11-19 15:04
摘要
Teleoperation of low-cost manipulators is attracting increasing attention as a practical means of collecting demonstration data for imitation learning. However, most existing low-cost systems rely on unilateral position control without force feedback, while implementing force-feedback bilateral teleoperation is difficult because low-cost manipulators typically have low-resolution encoders and no joint torque sensors. This paper presents a sensorless 4-channel bilateral teleoperation framework that integrates identified nonlinear dynamics compensation with a disturbance-observer-based velocity and external-force estimation scheme. By interpreting the observer structure in the frequency domain, we clarify the coupling between the velocity- and external-force-estimation bandwidths and derive practical tuning guidelines based on the damping ratio and a single cutoff frequency. Real-robot experiments, including force-sensor comparison and teleoperation tasks, demonstrate that the proposed framework provides practically useful force estimates and enables stable teleoperation in high-speed and contact-rich scenarios under low-cost hardware constraints. As an application, imitation-learning experiments demonstrate that incorporating estimated force information into demonstrations improves task success rates in the tested contact-rich manipulation tasks.
作者备注:22 pages, 12 figures. Published in IEEE Access
期刊信息:IEEE Access, vol. 14, pp. 109407-109428, 2026
观测到的版本
相邻记录可能跳过中间版本;首次发现 v2 及以上也会标为版本更新。
v8 · 2026-11-18 21:22 · 最新观测版本
Design and Experimental Validation of Sensorless 4-Channel Bilateral Teleoperation for Low-Cost Manipulators
Teleoperation of low-cost manipulators is attracting increasing attention as a practical means of collecting demonstration data for imitation learning. However, most existing low-cost systems rely on unilateral position control without force feedback, while implementing force-feedback bilateral teleoperation is difficult because low-cost manipulators typically have low-resolution encoders and no joint torque sensors. This paper presents a sensorless 4-channel bilateral teleoperation framework that integrates identified nonlinear dynamics compensation with a disturbance-observer-based velocity and external-force estimation scheme. By interpreting the observer structure in the frequency domain, we clarify the coupling between the velocity- and external-force-estimation bandwidths and derive practical tuning guidelines based on the damping ratio and a single cutoff frequency. Real-robot experiments, including force-sensor comparison and teleoperation tasks, demonstrate that the proposed framework provides practically useful force estimates and enables stable teleoperation in high-speed and contact-rich scenarios under low-cost hardware constraints. As an application, imitation-learning experiments demonstrate that incorporating estimated force information into demonstrations improves task success rates in the tested contact-rich manipulation tasks.
查看此版本解读 →查看此版本原文 ↗