arXiv:2610.34913 · v1
Quantile-Based Command-Reserve MPC for Current-Command Gimbal Pointing
摘要
This paper studies the constrained line-of-sight pointing control problem of a two-axis current-command gimbal subjected to mismatched mechanical disturbances. Friction, torque ripple, current-response lag, model mismatch, and limited drive commands make accurate pointing more challenging yet interesting. A quantile disturbance predictor is proposed to compensate predictable acceleration residuals and describe their remaining uncertainty, with the aid of learning median and outer quantiles from state, command, and reference histories. A tube-inspired model predictive controller is proposed to reserve command headroom according to prediction uncertainty, with the aid of calibrated radii and stage-dependent input margins. The median improves the nominal prediction, while the radius adapts the command reserve without adding optimization variables. A finite-horizon tube inclusion result is established for a specified linear error model and fixed ancillary policy; its conditions are distinguished from the approximations used in hardware. Native command bounds and a final command limiter keep the sent commands within their prescribed range. On a two-axis embedded platform, four controller configurations are compared in seven repeated trials each. The proposed configuration achieves a two-dimensional pointing root-mean-square error of $3.94 \pm 0.10$ mrad with no command-limit samples in the evaluation windows. Its performance supports the combined use of residual prediction and adaptive command margins in the tested operating condition. Solver times and logged loop overruns are reported separately for the nominal 100 Hz implementation.
作者备注：10 pages, 4 figures. Supplementary hardware trial data and recomputation scripts included as ancillary files. Submitted to Journal of the Franklin Institute