← 研踪 PaperTrailarXiv:2611.08857 · v1
STRIDE: Learning Humanoid Locomotion in Minutes with Acceleration-Based Rewards
首次提交 2026-11-06 09:27
版本更新 2026-11-06 09:27
雷达观测 2026-11-09 10:16
摘要
Learning locomotion directly on a humanoid robot is a promising direction to avoid the sim-to-real gap. However, locomotion rewards in Reinforcement Learning (RL) typically track the base velocity, which cannot be measured onboard without an external motion capture system or well-calibrated state estimator. This is why we introduce \method{}, which learns humanoid locomotion from minutes of samples with a reward that only requires the onboard Inertial Measurement Unit (IMU). Instead of tracking the base velocity, STRIDE rewards the robot for following a commanded acceleration profile. To learn efficiently from this reward, we use the off-policy RL algorithm XQC and combine a high gain setting for the joint position controllers with left-right symmetry augmentation. In simulation, STRIDE learns to walk on the Unitree G1 and Booster T1 humanoids within 14 minutes of samples. Compared to learning without these two components, it reduces the falls during training by 81%, while without them the robot learns only in over an hour.
观测到的版本
相邻记录可能跳过中间版本；首次发现 v2 及以上也会标为版本更新。
v1 · 2026-11-06 09:27 · 最新观测版本
STRIDE: Learning Humanoid Locomotion in Minutes with Acceleration-Based Rewards
Learning locomotion directly on a humanoid robot is a promising direction to avoid the sim-to-real gap. However, locomotion rewards in Reinforcement Learning (RL) typically track the base velocity, which cannot be measured onboard without an external motion capture system or well-calibrated state estimator. This is why we introduce \method{}, which learns humanoid locomotion from minutes of samples with a reward that only requires the onboard Inertial Measurement Unit (IMU). Instead of tracking the base velocity, STRIDE rewards the robot for following a commanded acceleration profile. To learn efficiently from this reward, we use the off-policy RL algorithm XQC and combine a high gain setting for the joint position controllers with left-right symmetry augmentation. In simulation, STRIDE learns to walk on the Unitree G1 and Booster T1 humanoids within 14 minutes of samples. Compared to learning without these two components, it reduces the falls during training by 81%, while without them the robot learns only in over an hour.
查看此版本解读 →查看此版本原文 ↗