跳到正文
研踪PaperTrail
← 研踪 PaperTrail

arXiv:2611.25991 · v1

From AI Surrogate to Engineering Tool: Toward Production Use of Fiber-Orientation Prediction in Crash CAE

首次提交 2026-11-19 20:12
版本更新 2026-11-19 20:12
雷达观测 2026-11-20 16:53
arXiv ↗PDF ↗

摘要

Crash simulations of glass-fiber-reinforced plastic parts are highly sensitive to the fiber-orientation field supplied to the material model. In conventional workflows, that field comes from resin-flow analysis, which requires molding-specialist support and takes about 25 hours of work per part. We previously proposed a surrogate model that addresses this bottleneck by predicting the orientation field in about 3 minutes. This paper reports the implementation, validation, and operational design that turned the model into an engineering tool for Honda design workflows. We present staged validation from 2D plates to production parts, evaluation against a predefined engineering angular-error criterion, and the expert review that approved design use in March 2025; the system has since been transferred to the crash-safety group and is in initial, limited use in directed fracture-prediction scenarios. The developed system combines injection-gate setting support for cases in which gates are unknown (90% gate-count accuracy, mean position error 11% of flow length), voxelization, surrogate inference, automatic mapping to the crash CAE model, and report generation in a single GUI. The complete orientation-preparation workflow takes about 0.1 hours, a 99.6% reduction from the conventional 25-hour flow-analysis route, and can be run directly by crash CAE engineers without molding-specialist support. As evidence of practical impact, component-level crash analysis using the predicted orientation field reduced the absolute peak-force error from 19.0% with an isotropic baseline to 11.4%, while confining predicted fracture to the test-observed region. The deployment lesson is that a surrogate model alone is not enough for practical adoption: gate-setting support, automatic data conversion, and shareable reporting are what make the model usable as a design tool.

作者备注:Extended version of the paper accepted at IAAI-27 (AAAI 2027), with technical appendices. 10 pages, 10 figures, 2 tables

AI 论文解读

基于摘要 · 非全文审阅

此版本尚未生成 AI 解读。解读由后台任务生成并按论文版本保存,登录后共享已有结果。

版本差异

目前只收录了一个版本。收录下一版后,可以对照标题、作者、分类和摘要。

观测到的版本

相邻记录可能跳过中间版本;首次发现 v2 及以上也会标为版本更新。

v1 · 2026-11-19 20:12 · 最新观测版本

From AI Surrogate to Engineering Tool: Toward Production Use of Fiber-Orientation Prediction in Crash CAE

Crash simulations of glass-fiber-reinforced plastic parts are highly sensitive to the fiber-orientation field supplied to the material model. In conventional workflows, that field comes from resin-flow analysis, which requires molding-specialist support and takes about 25 hours of work per part. We previously proposed a surrogate model that addresses this bottleneck by predicting the orientation field in about 3 minutes. This paper reports the implementation, validation, and operational design that turned the model into an engineering tool for Honda design workflows. We present staged validation from 2D plates to production parts, evaluation against a predefined engineering angular-error criterion, and the expert review that approved design use in March 2025; the system has since been transferred to the crash-safety group and is in initial, limited use in directed fracture-prediction scenarios. The developed system combines injection-gate setting support for cases in which gates are unknown (90% gate-count accuracy, mean position error 11% of flow length), voxelization, surrogate inference, automatic mapping to the crash CAE model, and report generation in a single GUI. The complete orientation-preparation workflow takes about 0.1 hours, a 99.6% reduction from the conventional 25-hour flow-analysis route, and can be run directly by crash CAE engineers without molding-specialist support. As evidence of practical impact, component-level crash analysis using the predicted orientation field reduced the absolute peak-force error from 19.0% with an isotropic baseline to 11.4%, while confining predicted fracture to the test-observed region. The deployment lesson is that a surrogate model alone is not enough for practical adoption: gate-setting support, automatic data conversion, and shareable reporting are what make the model usable as a design tool.

查看此版本解读 →查看此版本原文 ↗